Alignment Stage

ATR-7041-AL

1
XYθ Alignment stage
Estimate separately

Product documentation

▲PAGE TOP

Description

A thin motorized XYθ stage for fine adjustment.
XYθ can be driven and controlled independently.
Ideal for aligning electronic components and panels.
It is widely used for positioning samples in image processing equipment, inspection equipment, etc.

Alignment stage demonstration movie.
▲PAGE TOP

Specifications

Direction of travel XYθ axis three directions
Travel XY: ±5mm, θ: ±5°
Table size 70 mm × 70 mm
Motor Equivalent to PK523HPB
Resolution XY: 0.002mm, θ: 0.002°
Transfer mechanism Ball screw, lead 1 mm
Guiding method V-groove and Cross roller
Runout θ: 0.003 mm
Deflection θ: 0.005 mm
Travel accuracy HV XY: Straightness (horizontal and vertical) 0.001 mm
Repeatability XY: ±0.001 mm, θ: ±0.001°
Lost motion XY: 0.002 mm, θ: 0.005°
Moment rigidity 2sec/N・cm (Yaw), 3sec/N・cm (pitch), 2sec/N・cm (roll)
Load capacity 68.6 N (7 kgf)
Weight 1.7 kg
Maximum speed XY: 10mm/s, θ: 10° (at 5,000 pps)
Material / Surface treatment Aluminum alloy/Black alumite
HOME sensor Normally closed contact (break contact, B contact) operation, Photo sensor
LIMIT sensor Normally closed contact (break contact, B contact) operation, Photo sensor
▲PAGE TOP

Connection method - Cable, Controller and Driver -

Specification

▲PAGE TOP
製品に関するお問合わせはこちら お問合わせフォーム